Searching...
2015 Tour de France Guide

Lakeside Bicycles

428 N. State St., Lake Oswego, OR 97034
503-699-8665   Fax: 503-697-5557
Hours: M-F 10-7, Sat 10-6, Sun 12-5
     Home

Surly, agressively weird, functionally satisfying.

 
 
 
 

Repair Fee Schedule

Introduction

Repair Categories =>  Drive Train Wheel/Tire/Tube Bars and Stem Brakes Frame/Fork/Headset Accessories/Miscellaneous

 

at Lakeside Bicycles we get our mechanics young.This is a fairly complete, but not comprehensive fee schedule for bicycle repairs at Lakeside Bicycles.  Where ever possible we will offer to perform repairs while you wait, service which can normally be offered on this OUT THE DOOR basis are highlited in yellow.  We offer several bundled packages of repairs at a significantly lower final cost than the sum of the individual charges, however bundled repairs will need to be left at Lakeside Bicycles, at least over night.

We base our charges on the "Sutherland Handbook for Bicycle Mechanics"  This means that our charges are based on our hourly rate multiplied by a documented standard for how long it should take a trained bicycle mechanic to perform each task.  We thought you should know. 

We hire only trained mechanics who are required to undergo further, formal training as it becomes available from Campagnolo, Shimano, SRAM. Park, or other qualified sources.  Our mechanics start out good, and get better and better.  

We do take appointments for repairs at no additional charge.  We ask you to please make arrangements with the mechanics at 503-699-8665 and that you bring your bicycle in the day before the repair is due.  

Classic Campagnolo Tool Kit, you can find one at Lakeside Bicycles the Portland area's Campagnolo Experts

aaaaa

aaaaa

Drive Train

Derailleur Adjust front $20
Derailleur Adjust rear $15
Derailleur Replace with adjust $20
Derailleur Cable Replace front & rear with adjust $40
Derailleur Cable Replace each $20
Cable Install during tune-up $10
Drop Bar Brake/Shift Lever Replace $50
Ergo Lever Rebuild not including parts $50
Flat Bar Shifter Replace $50
    
Drive Train CLean remove and clean in solvent tank $65
Cassette Clean in solvent tank $25
Cassette/Freewheel replace $10
    
Chain Replace/Install $10
Chain Replace/Install during tune-up $5
Chain Clean in solvent tank $20
    
Crankset Replace (2-piece) $20
Crank Arm Replace/Install $10
Crankset & Bottom Bracket install BMX $10
Bottom Brackett Adjust $20
Bottom Brackett Overhaul $45
Simple Bottom Bracket (only) Replace $30
Hard Bottom Bracket (only) Replace sometimes they just don't want to leave

$60

aaaa

aaaa

Wheels/Tires/Tubes

 

Wheel Build, Basic new spokes, rim $65
Wheel Build, Complex salvage spokes or rim $80
Wheel True, Basic wheel is round and not bent $20
Wheel True Hard wheel is out of round or bent $40
Replace Spoke additonal for exotic spokes, includes truing $30
Spoke Length Calculation $10
Wheelset Install cassette, tires, rim tape, etc. $30
Rear Wheel Install cassette, tire, rim tape, etc. $25
Tube/Tire Install $10 additonal for 120 psi BMX tires or pegs
$10
Tubular Tire Glue includes cement or tape $50
Tubular Tire Clean may be necessary for glue up $30
 
Hub Adjust front $10
Hub Adjust rear, includes cassette removal, replace $20
Hub Overhaul front $30
Hub Overhaul rear, includes cassete removal, replace $45
Hub Overhaul 3 or more Internal Speeds
$150
Hub Overhaul coaster (kick-back) brake $75
   
Mavic Freehub Clean/Lube $20

aa

aaaa

aaaa

Bars and Stem

 

Handle Bar Tap includes removal of old tape, does not include tape $20
Handle Bar Re-Tape with old tape we do not warrent that the old tape will survive $49
Handle Bar Replace
includes taping, does not include tape, grips, cables etc.
$65
Flat Bar Grip Install includes removal of old grip, does not include grips $5
Aero Bar (clip on) Install $20
Aero Bar with controls Install $80
Raised Handle Bar (with cable replace) $80
Bar End Install here is a blast from the past, includes grip move $20
Riser/Flat Bar Cut Down $20
Open Face Stem Replace for single bolt stem, see "Handle Bar Replace" $10

aaaaa

aaaaa

Brakes

 

Brake Adjust $15
Brake Cable Replace may be more for internal cable routings, includes adjustment $15
BMX Detangler Cable Replace $35
Brake Calliper Replace non-disk, may be more for some vintages, includes adjustment $20
Brake Lever Replace (Road) does not include bar tape (it usually costs more to salvage bar tape than to replace it).
$65
Brake Lever Replace (Mtn.) may require new grips which are not included $30
Calliper Brake Pad Replace some vintages of cantilever brake will be more $15
Disk Brake Pad Replace $20
Hydraulic Brake Line Bleed includes materials $45
Hydraulic Brake Install moving old brakes to a new location may be more $60
Cross (bail-out) Lever Install does not include cables if needed $60
Cantilever Brake Install includes adjustment, even on vintage brakes $30

aaaaa

aaaaa

Frame/Fork/Headset

 

Derailleur Hanger Align we are not responsible if it brakes $20
Frame Align (steel only) we are not responsible if it brakes $30
Water Bottle Boss or other Braze-On Thread Chase $20
Head Tube Face and Chase $45
Bottom Bracket Face and Chase $45
Complete Frame Prep (Face and Chase, etc.) everything we do before assembling a bare frame $120
    
"Frame Saver" Application, Steel Frames Only includes materials, does not include disassembly of old bikes $30
Seat Tube Reaming cleans seat tube of snags, burs, etc. $30
Fork Alignment Check includes removal and re-installation of fork $65
Fork End Alignment $20
    
Fork Replace includes cutting the steerer $60
Threaded Steerer Tube Cut and Chase does not include removal and re-installation of fork $25
Steerer Tube Cut does not include removal and re-installation of fork $10
Crown Race Installation $30
Crown Race Facing and Installation $50
Suspension Fork Overhaul does not include seals or other fork specific parts $80
    
Headset Replace/Install includes crown race facing and installation $40
Hedset Cup Install $20
Headset Overhaul $65
Threadless Headset Adjust $10
Threaded Headset Adjust $20
Star Nut Install does not include gluing of shims for road forks $10
Crown Race/Cup Removal $10
Crown Race/Cup Removal including front end disassembly $30

aaaaa

aaaaa

Accessories and Miscellaneous

Box Complete Bicycle For Shipping $65
Box a Bicycle in a Hard Case based on the "Trico Iron Case" $30
Aircaddy K9100 Bike Box & Boxing Includes the re-usable Aircaddy $150
Assemble a Shipped Bike well shipped bikes may cost less.  $65
Assemble a New Boxed Bike like the ones we get from our suppliers $65
Pro-Build a Bicycle From Parts includes frame prep. and a 30 day tune up $300
Riv Nut Replace (each, no drilling) riv-nuts are used as water bottle bosses $15
    
Computer Installation:
wireless $15
wired w/o cadence $20
wired w/cadence $60
Ergo Brain (havn't seen one of these in years) $150
Flight Deck $80
battery replace & reprogram computer
$10
    
Training Wheel Install $10
    
Fender Install:
easy (a well behaved Hybrid or Cross Bike) $30
custom (it can take hours) $80+
clip on, wrap-a-round $20
clip on, easy $10
    
Pedal Install $5
Pedal Bearing Adjust (Each) $20
Pedal Overhaul  (Each) $30
Install Toe Clips $10
Install Clipless Cleats, basic does not include measured cleat adjustments $15

aaaaa

aaaaa

 

Customer Service: Products and Catalog Miscellany Who We Are Sign up for our e-news letter:
Name:
E-mail