Sage Titanium Flow Motion
Details
ENDURO/ ALL-MOUNTAIN: THE REFINED RIPPER
Shred the preconceptions of an all-mountain trail bike. That philosophy inspired the Flow Motion–a hardcore hardtail born on the legendary trails of Sandy Ridge, Oregon, and handmade right here in Portland. Don’t let the lusty titanium frame fool you– we built this burly beauty to test the limits. Launch it. Rip it. Climb it. Whip it. Drop it. Flow. This is the refined ripper.
As trails have progressed into ever steeper ranges and boundaries are pushed by the riders who ride them, the Flow Motion is designed to tackle all that comes with going downhill fast. Whether it is giant rock slabs, super steep gradients, large drops, step-ups or step-downs, the Flow Motion will tackle it all.
Unburdened by the complexity of pivots, the Flow Motion is light and snappy. Launch doubles with stability thanks to the extended reach and internal dropper post routing. Send it with the confidence, knowing that you will be landing on the strongest USA Made 3/2.5 titanium tubing. Session those sections until you can session no more. Push the limits. Find your Flow.
Available in standard geometries or as a custom frame. For more information please contact Sage at SageTitanium.Com or the Sage experts of Lakeside Bicycles by phone (W-F 10-7, Sat 10-6, or Sun 12-5) at 503-699-8665 or by email at Info@Lakeside-Bikes.com.
At Sage, 3/2.5 titanium is the magic material. The smooth riding alloy blends stiffness, durability and weight for the ultimate frame tubing. Titanium has a superior strength-to-weight ratio compared with steel and aluminum, and the fatigue tolerance far surpasses the other materials. Don’t fret long rain rides or brackish water crossings—3/2.5 titanium resists rust and corrosion better than any other metal tubing.
Longer/ Lower/ Slacker- Buzz words for sure, but when it is the truth, it IS the truth
Built using USA made straight gauge titanium tubing
Designed around a 150mm fork with a 44mm offset
29” specific wheel size
Internal brake and dropper line routing
Designed around a 29×2.4” tire- Tire sizes can vary. Actual tire measurement based on tire and rim combination of 60mm from knob to knob measurement with tire installed and fully inflated on rim
1X specific design
Boost chainstay spacing for a strong, nimble ride
31.6mm Seatpost design
All Sage frames have a raw finish with the titanium shinning in all its glory. But industrial brushing is not just simple with a sexy shimmer. It’s also practical. The lusty sheen can be polished and renewed time after time. While bead-blasted and high-polished titanium frames have an alternatively classy look, any cosmetic flaws must be fixed by the pros at the paint shop or titanium factory. Should the industrial finish scratch or scuff, simply grab a Scotch-Brite pad to buff out the blemishes. A little elbow grease and DIY initiative brings the bike back to life, giving the frame that polished glow like the day it first rolled onto the doorstep. Or send your frame to us, and Sage will refresh it with a full buff and new set of decals.
Classic and classy, the English-threaded bottom bracket reigns supreme over press-fit alternatives. The strong interface between bottom bracket cups and the frame eliminates creaks and maintains alignment that won’t slip or wobble over time. Additionally, installation, removal and service of the design are simply superior. No punching or pressing required. Just thread it, grease it, shred it. Repeat.
The oversized 44-millimeter head tube affords phenomenal front-end stiffness and precision on the road. Press-in headset cups provide a secure interface between frame and cockpit, and the large diameter opening accepts a wide range of steerer tubes, from 1?-inch straight to 1?–1½-inch tapered and every combination between.
fully customizable
