Named for the Frank Zappa/Mothers of Invention song (appears on the 'B' side of the CD release of "Absolutely Free") and for Dario's mother, Big Leg Emma is based on the Marcello with the addition of oversized tubes (22mm chainstays vs. the Marcello's 18mm) and internal re-enforcing gussets. It is, by far, the stiffest steel frame in Dario's stable and is designed for Clydesdales or over-quadded crit specialists. If you need a 60 or 62cm frame, it is probably your baby.

After you hear it described, the design elements of the Big Leg Emma are straight forward: One, that wider diameter tubes are less prone to flexing under load. Two, the down tube and the chainstays directly effect bottom bracket deflection. It is all pretty obvious until you add a sprinkle of Pegoretti genius.

To get there Dario took a page out of Falerio Masi's book (he used a similar technique to stiffen the chainstays of track bikes during the 70's) and added gussets (stiffeners) to the oversized downtube. Prior to welding up the frame, Dario laser cuts several small grooves into either side of the downtube. He then brazes in horizontal anti-flex plates and finishes it off by brazing ornamental covers over the incisions. At the end of the day Dario achieves his goal of an uncompromisingly stiff race frame without sacrificing vertical compliance or aesthetics.

The Big Leg Emma is available only by special order, We ask for a full deposit in return for which I will gently annoy the people at Gita on a weekly basis until your baby arrives. I have no idea how long it is going to take to get here (18 to 30 months is a guess and probably wrong) but I guarantee it will be worth the wait. Should you come to the reasonable decision to own a Pegoretti Big Leg Emma, please allow the enthusiasts at Lakeside Bicycles to offer your their assistance. Our hours are Pacific Time 10-7 W-F, 10-6 Sat, 12-5 Sun, you can e-mail us at info@lakeside-bikes.com or, if you would like to learn much, much more about Dario Pegoretti and his frames, just click this link.

Falz is a premium carbon fibre road cycling fork, designed, prepared and painted in-house at Pegoretti. It’s included as an option on most of their frames, but it’s not just for Pegorettis. Falz is an ideal aftermarket upgrade for any brand of road bike that uses a standard 1-1/8" headset. And because Pegoretti can paint it in a variety of RAL reference codes (including custom colours on request) at no additional charge, Falz is an excellent choice for the rider seeking a colour-matched carbon fork to complement their bike’s paint scheme.

Depending on your frame size, Falz is available in a choice of two rakes: 45mm and 50mm. As a rule, Pegoretti specs a 50mm rake for Pegoretti frames of 53cm and smaller, and 45mm for frames of 54cm and larger. If in doubt, please get in contact, and we can happily offer some advice on which option would be best for your bike.

We try to keep clear coated, raw carbon examples in both rim and disc versions in stock in both rakes. White forks are generally in stock at the importer and Pegoretti offers custom painted Falz forks in a wide range of RAL colours , insanely, at no additional charge.

Should you come to the reasonable decision to own a FALZ fork, please allow the enthusiasts at Lakeside Bicycles to offer your their assistance. Our hours are Pacific Time 10-7 W-F, 10-6 Sat, 12-5 Sun, you can e-mail us at info@lakeside-bikes.com.

Since the debut of the C40, Colnago’s C-series frames have combined history and technology along with a soupcon of passion and guts. The C60 is no exception.

Ernesto Colnago decided: It must be stiffer, and lighter, but also must retain the company’s iconic Master star-shaped tubes. It must be built for longevity, and that ride quality must be the primary goal. It must be fast, but there is no need to eek every ounce of performance at the expense of style. “An emotional bike, with soul,” Ernesto says.  Italian soul manifested in a technological tour de force.

Like all 'C' models, the C60 was built in Colnago’s Cambiago, Italy, facility, across the street from the home of Ernesto Colnago and painted at Colnago's facility in Tuscany.   The company’s premier frames, including the steel Master x Lite and the C-series, are still “fatto in Italia." 

The C60 retained the C59's Master star shaped, lugged tubes, is 140 grams lighter and a lot stiffer.  Similarities end there.  Compared with the C59, everything is bigger, wider, and stiffer.  

Lakeside Bicycles currently has one C60 in stock, a 55cm standard geometry frame in the MHCF color.  Guaranteed to accept a 25mm tire (though, when pressed, Colnago admitted that most 28mm tires will fit as well.)  Warranty is three years if registered within 11 days of purchase or 2 years otherwise.  The frame is complete with matching fork, seatpost and headset.  If you have any questions, please contact the Colnago experts of Lakeside Bicycles by phone (W-F 10-7, Sat 10-6, or Sun 12-5) at 503-699-8665 or via e-mail at Info@Lakeside-Bikes.com.

STRIDER Pro:

A little dirt never hurt anyone and a child who wants to go fast and get dirty needs the right tools. We create kids who have the moxie to say, “Bring it on. Challenge me. I’m ready, world.” The Strider 12 Pro Balance Bike is the bike of choice for kids who don’t just want to go fast but need to go fast… the rest of the world will catch up later, if it can.

Not even a full diaper is enough to slow down the Strider12 Pro. Designed for little racers, the premium Strider 12 Pro Balance Bike is the ultra-light, high-end bike for tiny speed demons who crave the wind in their face and freedom at their fingertips. An all-aluminum frame that barely tips the scale at 2.54 kg (5.6 lbs.), a textured performance footrest, and an official Strider number plate all mean your little dirt devil is going to be spinning up tornadoes around the other kids at the park.

With a seat height range from 28-48cm (11-19 in.), the Strider 12 Pro perfectly fits children with an inseam of 30-51 cm (12-20 in.).  For more information check our Strider's complete suite of instructional videos at https://www.youtube.com/striderbikes or feel free to contact the Strider experts of Lakeside Bicycles by phone (W-F 10-7, Sat 10-6, or Sun 12-5) at 503-699-8665 or by email at Info@Lakeside-Bikes.com .

Colnago has a number of top-tier carbon fibre race bikes in its line-up. There’s the Italian-made lugged-construction C64, the latest in the iconic C-series. There’s the Concept, the company’s answer to an aero racer. And there’s the V series, an all-round racer that uses a monocoque construction method (like almost every other carbon race bike at the pro level, excluding the C64).

It’s the last of these that Colnago has just updated to the company’s highest stiffness-to-weight ratio bike. The V3Rs and V3Rs Disc replace the V2r, a bike that has commonly been the pick for UAE Team Emirates and the now-defunct Wiggle-High5 women’s race team. And like a scene out of The Walking Dead, the V3r joins a long line of similar-looking, do-it-all, lightweight, stiff, compliant and semi-aero race bikes each of which is hungry for your attention.

What’s new?  Just as we’ve seen with Wilier, Scott and Cannondale, the V3Rs offers stealthy cable integration, dropped seatstays, increased tyre clearance and an overhauled geometry. And while the hefty cable integration is kept for the disc-brake version, there is a direct-mount rim brake version, as well.

The Colnago V3rs Somewhat simpler, the rim brake version offers direct-mount brakes and brake cable routing that’s not guided through the stem or headtube. Compared to the V2-r, the new frame is stiffer by 12% at the rear and 6% at the front, all while dropping some 50g of frame weight. A raw, unpainted, 52cm disc-version of the V3Rs weighed in at 790g, with an uncut fork at 390g.

However, at a guess, the cable integration found in the disc-version will add back any weight saved. And while Colnago hasn’t said by how much, the new frame is apparently more compliant, too. Part of that may be the overhauled carbon layup, or dropped seatstays allowing more seat tube flex. Another reason may be the new headset that offers surrounding composite material designed to aid in compliance — a feature borrowed from Colnago’s Concept and C64 bikes.

Colnago V3rs The geometry has been overhauled, but it remains race-orientated. Much like the new Scott Addict, the V3r is optimised for 28c tyres (it can apparently squeeze in 30c, although Colnago’s own literature says otherwise), and the geometry and fork have been revamped to retain a race bike fit and feel. For this, the bottom bracket has been lowered and the fork length increased, matched with a shorter head tube. With a sloping geometry, the stack and reach figures are now more linear across the eight frame sizes, as well.

While Colnago has made no specific claims about the aerodynamic performance of the V3Rs, it’s clear that with an integrated cockpit, dropped seatstays and seemingly truncated tube shapes, it’ll be faster than its predecessor. That fully integrated cabling is exclusive to the disc-version, and uses Colnago’s own stem and a special threaded fork steerer tube to route both the hydraulic hoses and electronic shift wires through the stem and directly into the head tube.  Colnago has reworked the integrated seat post binder, too, said to be smaller and more secure than what’s found in the V2r and C64. It holds Colnago’s own version of a D-shaped seatpost.

The Colnago V3Rs is available in 8 sloping sizes and 9 colors.  For more information we can be reached at 503-699-8665 or info@Lakeside-Bikes.com

Titanium Pathos:

The Pathos is loaded with features unique to BIXXIS, such as, custom drawn, tapered and double butted main tubes, generous chainstays, Rear Drop Outs and Bottom Bracket CNC machined from solid blocks of Titanium, and the Chris King D11 head-set all of which are combined under Dariano's watchful eye into the mystically wonderful whole that make the Pathos unique.

Pathos can be customized in every detail, including geometry, colors (as well as a custom sandblasted process), and components, to allow anyone to create the bicycle of their dreams. 

For more information about the Titanium Pathos or to begin the process of ordering your very own custom Titanium Italian road bike contact BIXXIS at https://bixxis.com/ or the BIXXIS experts of Lakeside Bicycles (W-F 10-7, Sat 10-6, or Sun 12-5) at 503-699-8665 or via email at Info@Lakeside-Bikes.COM .

ENDURANCE ROAD/ GRAVEL RACE

A study in refined ruggedness—this is one bike to rule them all. Named for the road that brought pioneers over the Cascade Mountains on the final leg of the Oregon Trail, the Barlow is built for epic adventures. It draws on the aggressive geometry and precise handling of our award-winning Skyline road bike, while also maintaining the comfort and toughness of an off-road machine. Some might label this design “adventure rider,” “gravel racer,” or “endurance road,” but Sage Titanium’s versatile frame transcends those conventional categories. No, the Barlow relishes the rigors of the dirt while begging for the speed of the road. It loads up for a tour and can handle the long haul. It does not compromise, and it flashes with the class of titanium. It does it all.

It’s not constrained to smaller gearing, like a cyclocross bike. It’s not limited by narrow rubber, like a road bike. It’s suited for any adventure at any speed. Additionally, the combination of an oversized head tube and bi-ovalized down tube provides a stable platform for snappy acceleration and precise, confident handling, on or off the road.

The refinement trickles down to the finer details on the Barlow. It’s packed with stealth, technical minutia that make substantial impacts. Integrated fender mounts, Bento Box Top Tube storage, and three water bottle cage mounts facilitate any extended wanderings away from civilization. Whether adventure takes you through a rotating pace line or over rugged mountain passes, the Barlow begs to ride it all in style.

Available in standard geometries or as a custom frame.  For more information please contact Sage at SageTitanium.Com or the Sage experts of Lakeside Bicycles by phone (W-F 10-7, Sat 10-6, or Sun 12-5) at 503-699-8665 or by email at Info@Lakeside-Bikes.com.

Titanium Seatpost V2

Smooth out the road with the ultimate seatpost. Titanium’s natural ability to dampen vibrations means you will feel fresher for longer, and allow you to go farther than you ever thought possible. Our new V2 model now includes our interlocking teeth feature for No-Slip Performance so your saddle will always remain exactly where you set it when you those times of needing to jump on the bike for a quick acceleration.

 For more information please contact Sage at SageTitanium.Com or the Sage experts of Lakeside Bicycles by phone (W-F 10-7, Sat 10-6, or Sun 12-5) at 503-699-8665 or by email at Info@Lakeside-Bikes.com.

The limited-edition Battaglin replica of Stephen Roche’s 1987 Triple Crown frame:

Villach, Austria. September 6th, 1987. Last moments of the World Championships of Road Cycling.  After nearly 7 hours of racing, the rain that had been falling steadily on the circuit since the morning stopped.  The crowd of spectators that had gathered to witness the event now had the chance to see clearly the most talented riders in the world engaging in the battle for the rainbow jersey.

The stakes were high, but until that moment the race hadn’t been a bit of a yawn. Just a few attacks, none of them decisive enough to mark a turning point.  Going into the climb at the beginning of the last lap, the Irish rider Stephen Roche attacked. Sean Kelly, the other star wearing the green jersey, stayed on his wheel. Their team had performed an excellent job.  The action split the group. The riders in the front got rid of most of the competitors, and only 14 racers were left. At this point, there was no other choice to chase the victory but trying to escape.

The Dutch Van Vliet got away. The German Golz followed him. Roche closed the break, and so did Sorensen and Winterberg.  The group of 5 established a small gap, while the riders behind didn’t react. It seemed like they were expecting for Moreno Argentin, the defending World Champion, to chase them down.  Italy was the strongest team in the peloton, and everyone considered Argentin the race favorite.  But the gap widened.

Four hundred meters from the finish line, Roche launched his attack. There was a narrow space between Sorensen and the barriers on the left side of the road. Roche daringly threw himself right there.  While he was approaching, Sorensen inadvertently moved to the left, shutting down that space Roche had chosen to be his way to the finish line.  The chances for the Irish to pass between Sorensen and the barriers were reducing at every pedal stroke.  But when Sorensen and Roche seemed so close that the action could a massive crash, the Danish moved to the right and Roche was out into the open.

He pedaled as hard as he could. This time Argentin responded, but it was too late.  Sprinting certainly wasn’t Roche’s secret weapon. He would have probably lost every time he’d found himself in a sprint with Golz and Van Vliet. Not that day.  On that day Stephen Roche won the 1987 World Championships.

In 1987, Roche was riding a Battaglin bike, which quickly became the icon of professional cycling’s greatest success.  The bike was developed by Giovanni Battaglin at his workshop in Marostica, where all the bikes for the Carrera riders were made, and custom-built to Roche’s specifications.  It was probably the most advanced racing machine on the market, featuring the best equipment available at the time.

With the Officina Battaglin brand, Giovanni has gone back to building exclusive steel frames using the same process and tooling of 30 years ago.  That’s why in 2017 he decided to mark the 30th anniversary of Stephen Roche’s Triple Crown with…the 1987.

 For more information about the limited edition Battaglin 1987, or if you would like to begin the process of ordering a frame, you can contact Officina Battaglin direct at: https://officinabattaglin.com/ or the Battaglin experts of Lakeside Bicycles by phone (W-F 10-7, Sat 10-6, or Sun 12-5) at 503-699-8665 or email at Info@Lakeside-Bikes.com

"Seven of the last 10 Tours de France have been conquered on a DOGMA, and the latest generation is now ready to continue that legacy of success. This is the culmination of all of our skill and experience, a masterpiece of engineering that offers advancements in handling, comfort, and aerodynamics all wrapped in a package that can climb, descend, and sprint with equal flair. Whatever the road throws at you, the DOGMA F is always the right bike."

When you have a frame that delivers not only incredible efficiency in lab and wind tunnel tests, but also regularly carries top riders to the podium throughout the road race calendar, improvements tend to be incremental refinements developed through even more advanced analysis and real world testing. In it's day the Pinarello Dogma F12 frameset was the benchmark, which didn't give the deranged geniuses at Pinarello even one moment's pause in their perpetual quest to build the world's next super bike.

Pinarello has long stated that weight is less an issue than the balance of aero efficiency, maximized power transfer, superior handling, and a more forgiving ride- but when faced with the excellence of the Dogma F12, it became clear that by assessing the whole assembly of the integrated cockpit and frameset, the overall set-up could be made lighter as well. By focusing on the seatpost, handlebars, and fork, as well as the frame, they were able to make the entire frame system 9% lighter than the F12 Disk.

Enter the Dogma F Disk. As a system, the Pinarello Dogma F Disk saves upwards of 265 grams compared to it's predecessor, while simultaneously gaining 12% stiffness around the bottom bracket. Reducing weight equals watts saved, but what is incredible is that the frame system weighs so little without compromising aerodynamics, handling, or ride quality. In fact, the Dogma F Disk has a lower drag than the Dogma F rim brake frame- a first for Pinarello.

Much of the disc brake aero advantage comes with the development of the new Onda fork for the Dogma F. The forks profile and cross sections improve fork and wheel integration, aerodynamically speaking, in order to smooth the air over the leading edge of the bike. Add in the Flatback aero shape design with it's truncated aerofoil for aerodynamic advantage, that is compliant to the 3:1 UCI rule, and you have excellent aero performance and low lateral wind resistance.

Beginning with the Dogma FPX AK61 Magnesium and continuing through the F10 and F12 The highest quality, most advanced materials have always been employed in Dogma-series framesets. The F Disk features the superlative properties of Torayca's T1100 1K Dream Carbon with Nanoalloy Technology. By refining the frame shapes and designs in the computer and wind tunnel, some weight directly came off the frame itself, while making several marginal aero gains that deliver a 4.8% improvement in aero efficiency over the F12 Disk, delivering a potential 2.6 watts saved at 50 km/hour. A modest but real gain that advances the demonstrated excellence of the F12 Disk. When you factor in the dropout to dropout Asymmetric engineering and design, which has long been proven effective for optimal power transfer, impeccable tracking, incredible handling at speed or while descending, and you have true cycling transcendence.

Available for Electronic Shifting Only.

For more information we can be reached at 503-699-8665 or at info@Lakeside-Bikes.com .

The Process 153 DL 29 has been the steed of choice for aggressive riders all over the world. It’s the go-to bike many of our staff ride because it does everything well. It’s been tested and perfected in our hometowns on the North Shore in BC and Bellingham, Washington. We’ve built this bike to be ready to dominate right out of the box, but there are easy ways to upgrade should you choose to do so. With 160mm of front travel and 153mm in the rear, burly Maxxis tires, and ultra-supportive suspension the Process 153 DL 29 will become your most reliable trail slayer.

For more information please contact the Kona experts at Lakeside Bicycles, 503-699-8665 W-F 10-7, Sat 10-6, or Sun 12-5 or via email at info@lakeside-bikes.com.

A lightweight Campagnolo compatible hubset designed expressly for the demands of road racing. Light The R45 hubset is 20% lighter than King's Classic hubset at 328g. They designed sleek new hubshell bodies and new 17 mm axles. That's 17 mm from dropout to dropout resisting deflection during cornering or when the power is full on. Chris King designed a driveshell with a twin bearing design that responsibly removed as much weight as they could from the inner components. Even their patented RingDrive engagement system was redeveloped resulting in a quiet, fast-engaging 45-tooth stainless steel system unique to the R45 rear hub. All of this comes with the standard Chris King 5-Year Warranty and is compatible with Campagnolo 9,10 and 11 speed drivetrains. Lock Rings The R45 for Campagnolo comes standard with an 11-tooth lock ring which is required for use with the Chris King driveshell. An optional 12-tooth lock ring is also available at your favorite shop or directly from Chris King. Fast Chris King designed and built a bearing specifically for the R45 hubset. As with every King bearing, these stainless steel sealed bearings are made in-house in Portland, Oregon and individually hand-checked for precision and smoothness. Chris King's proprietary bearing design allows them to place more rolling elements per bearing meaning greater durability and precision. R45 bearings also feature lightweight, low-friction seals for fast rolling and can be easily serviced at regular intervals using only a single 2.5 mm hex wrench and penknife. R45 Options: Ceramic Bearings - Made in-house Chris King makes their own ceramic bearings and theye build them to the same exacting standards as their classic, time-tested stainless steel ball model. Pairing the corrosion resistance of ceramic balls with Chris King's proven sealing system allows for greater flexibility with greasing options. Chris King builds their ceramic bearing R45 hubs with a very small amount of silicone-based lube for a system with very low drag. Take advantage of Chris King's user-serviceable bearings and change to a dry lube for the ultimate in race-day performance. Stainless Steel Bearings - Made in-house The R45 Campagnolo hubset also has the option of stainless steel sealed bearings. As with every King bearing, these bearings are made in-house in Portland, Oregon and individually hand-checked for precision and smoothness. Hubshell Drillings R45 front hubs are available in 20, 24, 28 & 32 hole options. R45 Campagnolo rear hubs are available in 24, 28, & 32 hole options.

No other bottle looks like Purist Hydroflo, or performs like it. It is the culmination of everything Specialized has learned in over 30 years of making the world’s best water bottles. Try one: You’ll never think about your bottle again (for all the right reasons)!

Maximalist off-road tourists, explorers looking to get off the beaten path, and survivalists for whom being stranded isn’t an option will all appreciate Pugsley’s wide footprint, long and stable wheelbase, and plethora of accessory mounts. Since way back in twenty-aught-three, Pugsley has seen it all: intercontinental bikepacking trips, bushwhacking at its finest, mirages in the desert, and countless souls taking on the Arrowhead 135 ultra-endurance race. It’s seen some, shall we say, sticky situations, but it always finds its way out. Its proven track record gives it the calling card as the quintessential fat tire expedition bike. This is a little used and extremely well equipped example in a hard to find size. Sold as-is and without warranty, for more information we can be reached at 503-699-8665 or info@lakeside-bikes.com

Kids move fast, and grow faster. At times, it can seem like there’s a small window for the perfect bike fit. The right bike for a young rider is a delicate balance between too small, too big, and a short-lived just right. If we’re going to inspire the next generation of riders, we need to keep kids comfortably riding longer. The Jett is designed so that you’ll never fear the growth spurts. We did our homework to understand how kids grow—spoiler alert, kids’ arms and legs grow more rapidly than their torso. We took to the books and designed a bike with child-specific touch points that withstand the development of young riders. The Jett is uniquely adjustable, perfectly proportional, and child-liftable—you’ll always be set to Jett. The Jett Single Speed features an adjustable handlebar that allows kids to fine tune reach as their arms grow. The narrower saddle and grips were informed by a Retül study on kids to be the appropriately size—with handbrakes on both the 16” and 20”. And what’s more, we designed the frame and reviewed every component to make the Jett one of the lightest bikes on the market. You’re going to have to beg them to get off this bike. We designed the Jett Single Speed to be uniquely adjustable with longer seatposts and adjustable handlebars so kids can dial-in the perfect riding position as they grow. Every detail of the Jett Single Speed—including the 130mm Bridge saddle, narrower-diameter grips, and short-reach, tool-less adjustable brake levers—was informed by Retül data from a kids’ research group to be perfectly proportional for young riders. A lightweight bike is simply more fun and the Jett Single Speed’s all-new A1 aluminum frame, alloy fork, Pathfinder tires, and single-speed drivetrain make it one of the lightest kids’ bikes on the market. For more information we can be contacted at 503-699-8665 or info@Lakeside-Bikes.com

On the way to the top you need more than just power

To keep up with the top field, you need material that provides you with precision, performance and safety. Thanks to a unique stiffness to weight ratio, OBERMAYER EVO transforms every step of yours into maximum propulsion without any loss of energy. And with only 1.230 grams total weight, it is one of the lightest disc wheel sets available. OBERMAYER EVO is Lightweight’s ultimate performance disc wheel and is suitable for (mountainous) roads, training and competition.

Incredibly light - unbelievably stiff

Our OBERMAYER EVO is the further development of the popular MEILENSTEIN OBERMAYER wheel and available as a disc model. The tubeless version offers you the best stiffness to weight ratio with maximum heat resistance. OBERMAYER EVO is particularly light and one of the lightest, most exclusive and most powerful disc wheelsets in the world.

When it came to the OBERMAYER EVO, our engineers didn’t leave anything to chance. That’s why they used LCC-Carbon, which has already been successfully tested and used in aerospace. Thanks to the Active Foam Core, we were once again able to save on weight and at the same time increase stiffness. Weighing in at only 1.230 grams, it is one of the lightest full carbon disc wheel sets available at the moment. The proven Rim-to-Rim design, combined with the Lightweight Performance Shape, ensures breathtaking acceleration. The full carbon spokes are directly connected to the wheel and, thanks to especially optimized CFRP fibers, make for unparalleled braking precision. The innovative Pentagon SL Hub is 60 grams lighter and improves heat dissipation during braking, subsequently increasing safety on long descents. The maximum allowed system weight of OBERMAYER EVO is 100 kilograms.

Less energy consumption during ascents and increased braking performance during descents – that is OBERMAYER EVO.Lightweight OBERMAYER EVO is a performance disc wheel made entirely out of carbon and is available in the Standard Edition as well in the Schwarz (with Ceramic Speed bearings) ED. Every Lightweight wheelset is carefully handcrafted in Germany. As a result, slight deviations in colour and surface structure may occur. This is a characteristic quality feature of the high-quality manufacturing process. .

For more information we can be reached at 503-699-8665 or at Info@Lakeside-Bikes.com.

The bike has about 100 miles of riding over the course of 3 rides as we tested the Campy groupset and wheels. It has never been crashed or laid down in any way. The frame is a slightly modified 56cm geometry with only the headtube being 13mm taller than a stock frame. This does increase the Standover Height and the Stack a little bit, but not by much.

A study in refined ruggedness—this is one bike to rule them all. Named for the road that brought pioneers over the Cascade Mountains on the final leg of the Oregon Trail, the Barlow is built for epic adventures. It draws on the aggressive geometry and precise handling of our award-winning Skyline road bike, while also maintaining the comfort and toughness of an off-road machine. Some might label this design “adventure rider,” “gravel racer,” or “endurance road,” but Sage Titanium’s versatile frame transcends those conventional categories. No, the Barlow relishes the rigors of the dirt while begging for the speed of the road. It loads up for a tour and can handle the long haul. It does not compromise, and it flashes with the class of titanium. It does it all.

All of our demo/ show bikes carry our limited lifetime warranty so you can rest easy at night knowing your frame is covered should something happen to it. Complete bikes are tuned up prior to shipping. This includes new chain, bar tape, and brake pads as necessary. Complete bikes ship out within 7-10 business days after your order has been confirmed.

Please note: This bike was custom painted for the 2023 MADE bike show and was intended as a launch platform for the Campagnolo Super Record Wireless group. The frame is custom cerakoted in an Armor Black with a polish gloss over the logos to give them extra pop. The 2 small Italian flags are an homage to the Campagnolo groupset and the wheels on the bike. This is a one-of-a-kind artwork scheme.

For more information please contact the Sage Titanium experts of Lakeside Bicycles by phone (W-F 10-7, Sat 10-6, or Sun 12-5) at 503-699-8665, or by email at Info@Lakeside-Bikes.com.

Welcome to Bixxis:

BIXXIS opened in 2015 inspired by the desire of Doriano De Rosa and his daughter Martina to produce a generation of steel and titanium racing bicycle frames which embodied their taste for true cratsmanship.

Experience and innovation:

BIXXIS is built on Doriano’s 40-years' experience as a frame-builder and student of innovative technological solutions. His and his daughter's passion for cycling is the foundation for the creation of beautiful artisanal bicycles for modern cyclists.

This is why they chose the acronym BIXXIS, which means Italian Bicycles for the twenty-first (XXI) century.  Bixxis’ philosophy grows out of essential values: the taste for well-made things, tradition but combined with their passion for innovation all coupled with sensitivity to the needs of cycling enthusiasts, both professional and amateur.

A Taste of Unicity*:

BIXXIS products are entirely hand-made. Each BIXXIS frame is 100% made in Italy, at their Seregno workshop, just few miles north of Milan. They have chosen to use steel and titanium to make frames last longer, and maintain their value. By employing TIG welding BIXXIS creates extremely light metal frames.

Listening their clients is fundamental: they listen before they speak and they also speak little because doing is better than saying. Doriano and Martina will listen to your requirements and queries with an ulmost attention born out of their deep attachment to every frame they produce. Each Bixxis is unique, as are tastes, passions, expectations from each cyclist. Every geometry is the outcome of an in-depth study with specific drawings built from each clients specific requirements.

Talking about unicity BIXXIS wants to offer an original bicycle from its individual elements. For instance, each BIXXIS integrates a customized dropout and is built from  proprietary Columbus tubes, and includes design features such as X-Stays which give the frame more strength and optimize on-road performances.

Love for real things:

BIXXIS clients are genuine people who love real things and are passionate about them. Each BIXXIS bicycle is exacly this: it’s more than an object, it’s an act of love and truth towarsd cycling – that’s exactly what we feel every day. As every day, you’ll be welcome at the Bixxis workshop.

BIXXIS Prima XL